Thursday night.... CHILLY .....WET .... day. Started at 34... only got up to 40... Cloudy early... Rain started at about 8, and it has rained all day. Not real hard although we had a couple of good solid periods of actual raining... but it was a lighter rain and showery type all day long... Cold and raw out there.
I am sooooooo THANKFUL for the moisture. I have no idea of how much... will check and empty rain gauges in the morning. This is supposed to pass by tonight, and be partly cloudy early then partly sunny by noon time and warmer in the 50-60 range.
Looks like
@Mini Horses actually will have gotten more than us as it was 2 "lows" that made this rain; one from the south and one from the west. I think they "met" closer to the south and east of us. Not complaining, we got a fair amount of rain out of it but not the "yellows" on the precip map that they were getting east of here.
Busy day... glad it is finally over. Got home a little bit ago, made some ramen noodles to have something warm that was easy.
Got up, got the bottles ready for today and brought in the boxes of bottles for tomorrow's herd but they did not get put in the trays yet. Got the little bit of trash from the house in the forester along with the 2 feed bags full. Made the bottle and headed up to the nurse cow pasture. Cow was very glad to come in. I fed her grain, put some in the bunk in the other side, if the calves come in; gave her about 2/3 bale of hay that was "opened" up, in the bunk. Fed the calf the bottle, then he went right back on the cow.
It was raining already when I went up there. Came out and they were done for the day... calves will both nurse her off and on and the holstein does not act "starved" so he is getting some. He is looking pretty good and the jersey is rounding out a little. She might be making more milk since she is getting a fair amount of grain so she can come into more milk if possible...
Left and went down to the dumpster and then swung by the co-op... there were 2 cars there so I went to mechanic's shop 1/2 mile down the road. Told him what DS said, they know him so know he has a pretty good idea of what he is talking about.
They said to call Tuesday, they had a backlog and the lot was full... should be able to get it in next week... I said fine... gave me a very "round estimate" if it is the wheel bearing...of about $2-250... said parts are about $125-150 and then labor... should only take 1-2 hours... but they will know once they get it up on lift and look at it... Also considered if it is the CV joint... as there is a "click-click" when turning it one way.. on the right front... but that has been there for 2 years and they said back then to drive it until something happened... because they could not find anything loose or anything back then... he went out with me in the car and I turned it so he could hear it... but DS had not been able to find anything, then they could not find anything.... so I have been driving it like he said... that is not what is wrong with it this time, as it is the left front wheel. I asked about replacing both, if they thought it needed it... since they are the same "age"... and they will go over it and check it all out... CV joint is about $150 parts....plus labor.... and this car is definitely worth fixing....He said it would only take a couple hours to do it most likely... but will know more once it is put up on lift and checked out to make sure exactly what it is...
I'm good with that... I was thinking $3-500 .... so well within my "possible cost" idea...
So next week... and that will give me time to get things out of the car I need for work. But it won't be tied up very long unless they run into problems.
Went back to the co-op. There was a guy going in to get his battery checked for winter... so I only had to wait 10-15 min... then got it in to get the inspection done. Had one bulb out, and everything else checked out. Left the "spare" tire/wheel we put on in the driveway... got the air checked in all the tires, picked up the tire they plugged... and they put the license plates on since I didn't have any of the screws to put them on with...
Left there. Came back by the house. Got the bottles for testing... changed the brackets on the meters I needed, loaded hoses, took the calf bottle in to get washed.. and left. Had to go back by the farm that I put their "set of reports" in their computer as one was not right. My mistake... I punched in the wrong number for a database item... didn't take long and got it fixed. Left and headed to test. Of course this all took longer than "you" plan for, so didn't have time to go by Walmart to return some stuff... but it will keep. Maybe tomorrow.... Traffic was heavy and it rained all the way to the farm. Got there about 5:10... got set up and they actually got started milking on time about 6... done about 7:30 then the computer work... then waited for the meters to wash and all... left there about 8:45 or so... got home about 10:20.... Rained all the way. lots of truck traffic and it was a LOOOONG trip home...and traffic was really moving... so not fun with the heavy fast speeds either.....
I will bring in the samples in the morning. It was still raining decently so no way did I need to get wetter. It is supposed to pretty much move out east overnight... so will get them in the morning and get them packed. I have to take out the bottles for the herd tomorrow anyway. Plus get another 8-9 meters, change their brackets, and put in the car and a few more hoses maybe.
Will go up to the cow/calves in the morning and let her out for the day and they can stay in after she eats grain and I feed the bottle and the jersey usually nurses when she is eating also... Then I will leave to go to test.
Sun is supposed to be out for the next couple of days too... Back up in the 60's so nice. Possible rain coming in again middle of next week.
A lot of the leaves came down off the trees that still had some, I expect the same here with the maple... might dry out in a couple days to be able to sweep some early in the week.
I'm tired... past time to go to bed.