Dinner rabbits, Journal

secuono

Herd Master
Joined
Oct 16, 2010
Messages
9,041
Reaction score
13,361
Points
623
Location
Virginia is for Pasture Farmers!
$286 in the red. 179 in feed. Only had 10 bags.

Currently $465 in the red.



Got three culled and bagged. Someone is supposed to come by them like this. We'll see. 🤞 Woke up extra early to have time to get them done. *phew* Should of not cut belly flap as far to chest, hinds would of fit better that way.
With heart, liver, kidney & bit of fat.
Live to Butcher weights-
8.14 to 4.98
7.47 to 4.35
9.16 to 5.03
20240928_102445.jpg



Next weekend is the 4 live bun sale. 4 proven does pending. Lynx, yynx, widy & ebony.🤞
Setting up meet for the blue Rex buck kit. Then two Rex doe kits. 🤞
I think that leaves one mutt and the 2 broken sf.
Might not keep the last Widy grow out, it's a buck and doesn't seem wide.

I believe that'd be everyone to get down to 25. Though, that Widy kit would drop it to 24. Then just 4 others to cull.


Moved rabbits around. Removed a divider. Most have their own cage.
Still trying to get the old cage clips off. They're not cheap clips, so they're much tighter to the wire and much harder to pry off. Grinder was no good. Narrowing pliers with grinder was no good. A screw only worked on one that happened to have a big enough gap.
20240926_152132.jpg20240926_152436.jpg

Nothing is working to get these off. Now cutting the floor out instead. Slow going, but finally getting somewhere...
20240928_174210.jpg
 

secuono

Herd Master
Joined
Oct 16, 2010
Messages
9,041
Reaction score
13,361
Points
623
Location
Virginia is for Pasture Farmers!
Got the floors out of a stacker, then started on the wall. Leaving a small section to support the floors and for stability. Should of done that to the other stackers. Those previously joined will have to be taken apart to replace their floors, too. And then I'll add short pieces to support floors on it.
20240929_104717.jpg

Ordered these. Hoping I can stab into the sides and pry them off. Kinda doing that with tin snips, only way I've found that can work, but is super rough on my hands, have a new welt developing from the ones I removed today. 🫠
Screenshot_20240929_112248_Gallery.jpg
 
Last edited:

secuono

Herd Master
Joined
Oct 16, 2010
Messages
9,041
Reaction score
13,361
Points
623
Location
Virginia is for Pasture Farmers!
Oh, the pliers. Already dull. 🫠 And like I said, cannot be used as website shows. Gotta pry the middle clip, then you have a chance at prying the other two clips and off it goes. Some refused and had to be cut. New welts and missing flesh. What fun. But it's faster than tin snips.
 

secuono

Herd Master
Joined
Oct 16, 2010
Messages
9,041
Reaction score
13,361
Points
623
Location
Virginia is for Pasture Farmers!
4hrs working on it today. Moved the finished one into place and swapped buns & feed/water. Then dragged the single and took it apart.
Almost ready. Turns out two 2×2 foot doesn't equal 4ft. 🫠 so, will have to cut once I'm sure of the amount, then secure and 3 does can move in.
20241002_122922.jpg20241002_123747.jpg20241002_135618.jpg20241002_142528.jpg
 

secuono

Herd Master
Joined
Oct 16, 2010
Messages
9,041
Reaction score
13,361
Points
623
Location
Virginia is for Pasture Farmers!
Man, these things never really fit great together...but nearly ready for 3 does!
Had to buy 3 new pans, though.
20241004_171025.jpg

Also figured out the new removal pliers can help get the j-clips started.
I've bought 2 different specialty j-clip pliers and they both suck! I used to sit and bend all of the clips. The curve I'd crush to be more closed, then bend the straight tail. They would never go on properly otherwise! Wtf is up with that?? C-rings for hogs and such are a better clip, they always ring properly, but already had the bags of j-clips on hand.
GIF_20241005_065951_752.gif


Website also got updated.




$415 in the red. 4 bun sales at 150. Lynx, yynx, widy & ebony.

Currently $265 in the red.
40789-2d85390673d742e29487e2390bbbdb46.jpeg


Working on the 3 frozen bun sales. Just need to find a day to deliver them. 80 for those delivered. 🤞

And I might have a live sale of the 2 proven does, bred doe and doe kit. Or a buck instead of one doe. 🤞🤞🤞🤞 Really hope it works out, don't want to cull the friendly does!
 
Last edited:

Latest posts

Top