My Little Hoop Coop

fuzzi

True BYH Addict
Golden Herd Member
Joined
Sep 20, 2024
Messages
943
Reaction score
4,294
Points
273
Location
Eastern NC
I was over at BYC looking through articles and threads on hoop coops. Not ONE that had a solid back showed or explained how they attached it.

Maybe I will drill holes and zip-tie it. :D =D

I still will have to attach the hardware cloth, too, but I feel better about finding a method that will work.
 

SageHill

Herd Master
Joined
Aug 27, 2022
Messages
4,879
Reaction score
18,598
Points
553
Location
Southern CA
I was over at BYC looking through articles and threads on hoop coops. Not ONE that had a solid back showed or explained how they attached it.

Maybe I will drill holes and zip-tie it. :D =D

I still will have to attach the hardware cloth, too, but I feel better about finding a method that will work.
There are metal zip ties - guessing they would last longer than the plastic ones that dry out and snap in heat and sun.
I haven't tried any yet - but like this....
 

SageHill

Herd Master
Joined
Aug 27, 2022
Messages
4,879
Reaction score
18,598
Points
553
Location
Southern CA
I used black zip-ties with my first hoop coop 2 years ago). They're all still holding. The black is UV resistant.
Same ones I use here. Out here they last about a year - LOL I've got broken zip rings all over the place and am constantly picking them up. But I still use black zip ties. Could be my weather is tougher on them - always sunny.
 

Baymule

Herd Master
Joined
Aug 22, 2010
Messages
37,017
Reaction score
117,055
Points
893
Location
East Texas
Storm knocked power off. No heat lamps for chicks. I called power company and told a nice lady that I have a bunch of baby chicks and would deeply appreciate anything they could do. I know they are just chickens and people are more important, but I don't want them to die.

The wind blew so hard that the big blue tarp I wrapped the coop in blew out like a huge balloon, then sucked in against the hoop panels. It blew so hard that it rolled the cinder blocks holding the sides down almost to the edges of the tarp. I stomped it down and put them back against the sides of the coop.

It is currently 70F degrees in the coop. Rain has mostly stopped and sun is peeking out, I think it will be ok. I finally opened the door and fed and watered them. I had a plastic cut open feed sack duct taped over the door, trying to seal it from the wind and rain. But somehow just inside the door was a puddle.

I fed the bigger chickens, they have enough water to last them to this evening. There is a dead chicken in there, didn’t want to raise the top to get her out, it can wait.
 

fuzzi

True BYH Addict
Golden Herd Member
Joined
Sep 20, 2024
Messages
943
Reaction score
4,294
Points
273
Location
Eastern NC
Same ones I use here. Out here they last about a year - LOL I've got broken zip rings all over the place and am constantly picking them up. But I still use black zip ties. Could be my weather is tougher on them - always sunny.
Hot and sunny here, too, but humid as well. Might have something to do with them lasting.

When I built the first coop I tried using wire, but I just don't have the strength in my hands to attach it. If/when the ties break I'll replace them.
 

fuzzi

True BYH Addict
Golden Herd Member
Joined
Sep 20, 2024
Messages
943
Reaction score
4,294
Points
273
Location
Eastern NC
When I got home from work I changed into yard clothes, fed and watered the flock, and collected eggs.

Then I looked at the hoop coop and said "Why not? You've got light."

I started drilling holes for the zip-ties, adjusting the cattle panel to fit as much as I was able.
IMG_20250304_171323988_HDR.jpg


But on the woods/south side there was a little gap at the bottom.

Fixed it!
IMG_20250304_173112747~2.jpg

I sunk a 3" screw through a small piece of 2x4, then into the coop base.

On the opposite side I attached the panel with a 2" screw and washer.
IMG_20250304_181138610~2.jpg

If you look closely on the right you can see where I covered the gap.

South side done.
IMG_20250304_181148232.jpg


But the other side was a bit tricky, the cattle panel was not cooperating.

I brought out my reciprocating saw and tried trimming off the extra.
IMG_20250304_181240018~2.jpg

More like chopping than trimming...

I was running out of light, and decided to wait for another day to clean it up. But for all intents and purposes, the back is attached!
IMG_20250304_181123803.jpg

IMG_20250304_181231587~2.jpg


IMG_20250304_181617364~3.jpg
 

SageHill

Herd Master
Joined
Aug 27, 2022
Messages
4,879
Reaction score
18,598
Points
553
Location
Southern CA
When I got home from work I changed into yard clothes, fed and watered the flock, and collected eggs.

Then I looked at the hoop coop and said "Why not? You've got light."

I started drilling holes for the zip-ties, adjusting the cattle panel to fit as much as I was able.
View attachment 115693

But on the woods/south side there was a little gap at the bottom.

Fixed it!
View attachment 115694
I sunk a 3" screw through a small piece of 2x4, then into the coop base.

On the opposite side I attached the panel with a 2" screw and washer.
View attachment 115695
If you look closely on the right you can see where I covered the gap.

South side done.
View attachment 115696

But the other side was a bit tricky, the cattle panel was not cooperating.

I brought out my reciprocating saw and tried trimming off the extra.
View attachment 115697
More like chopping than trimming...

I was running out of light, and decided to wait for another day to clean it up. But for all intents and purposes, the back is attached!
View attachment 115698
View attachment 115699

View attachment 115700
Awesomeness!!
 
Top