Teresa & Mike CHS - Our journal

Mike CHS

Herd Master
Joined
Mar 18, 2013
Messages
10,736
Reaction score
39,324
Points
793
Location
Southern Middle TN
That one of Maisey should be on a Calendar.....:love
I know with all the heavy work involved, it is much Better at this "stage of life" to be the supervisor instead of the "grunt"....especially in the heat....and with extra hands it sure gets done much faster also......:)

There is no way that I would attempt this as a do it yourself project. :) I like the way these guys work so I just stay out of the way. If it wasn't for the rock they could just about have it done tomorrow but considering how long it has taken to drill three holes, we shall see. They are coming back early to get started before the heat.
 

Mike CHS

Herd Master
Joined
Mar 18, 2013
Messages
10,736
Reaction score
39,324
Points
793
Location
Southern Middle TN
They finally got the rock holes deep enough to set posts with concrete so hopefully it will go up fairly fast.

Poles going Up 29 May 2019.JPG
 

Mike CHS

Herd Master
Joined
Mar 18, 2013
Messages
10,736
Reaction score
39,324
Points
793
Location
Southern Middle TN
I'm going to offer the builder the chance to change his labor estimate since he didn't know what he was running in to. One thing I hadn't planned on was being as close to the hill as it has turned out to be but it needs to be there to meet the state's requirement for the minimum height at the outside corner. They already let me drop from 10' height to 9' so I wasn't going to ask for another waiver.
 

Mike CHS

Herd Master
Joined
Mar 18, 2013
Messages
10,736
Reaction score
39,324
Points
793
Location
Southern Middle TN
This is so cool to see your progress going so quickly, :yesss:

If they didn't have to spend half a day drilling holes, it would be done except for the metal roof because it isn't here yet. :)

The first picture is the end truss (the inner one is already attached. The second picture was about 20 minutes late. I just looked out and the supports are set on that side also.



End Truss 29 May 2019.JPG
 

Attachments

  • End truss2 29 May 2019.JPG
    End truss2 29 May 2019.JPG
    242.1 KB · Views: 175
Top